Telwin SUPERIOR PLASMA 70 plasma cutting system
Plug not included
Part no.: 500816170
Further information
- Dimensions L x W x H (mm):
- 470 x 190 x 360
- Technical data:
- Inverter system for compressed air plasma cutting with contact ignition of the pilot arc.
For fast, distortion-free cutting, lattice cutting and gouging of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.
Automatic cutting systems can also be connected
• Easy to transport
• High cutting current stability
• Easy-to-read digital control panel with easy adjustment
• Remote control
• Mains voltage 230/400V
• Protection class IP 23
• Compressed air 4-5 bar
• Max. power consumption 5.5/8.5 kW
• Max. cutting thickness 30 mm
• Air consumption 200 l/min
• Control range 20-50/20-70 A
• Power factor: 0.9
• Mains frequency: 50/60 Hz
• Max. current: 50 A - 35% / 70 - 30%
• Max. open-circuit voltage: 310/325 V
• Max. power consumption 16/13 A
• Including TOLEDO 300 earth clamp - Mains voltage (V):
- 230 / 400
- Cutting thickness (mm):
- 25
- Weight (kg):
- 15.8
- Protection class:
- IP23
- Air consumption (l/min):
- 200
- Power consumption max. (kW):
- 5,5 / 8,5
- Control range (A):
- 20-50 / 20-70
- Air pressure (bar):
- 4 - 5
- Additional information:
- Inverter system for compressed air plasma cutting with contact ignition of the pilot arc.
For fast, distortion-free cutting, lattice cutting and gouging of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.
Automatic cutting systems can also be connected
Properties:
• Easy to transport
• High cutting current stability
• Easy-to-read digital control panel with easy adjustment
• Remote control
• Mains voltage 230/400V
• Protection class IP 23
• Compressed air 4-5 bar
• Max. power consumption 5.5/8.5 kW
• Max. cutting thickness 30 mm
• Air consumption 200 l/min
• Control range 20-50/20-70 A
• Power factor: 0.9
• Mains frequency: 50/60 Hz
• Max. current: 50 A - 35% / 70 - 30%
• Max. open-circuit voltage: 310/325 V
• Max. power consumption 16/13 A
• Including TOLEDO 300 earth clamp - Weight:
- 15.80 kg
- EAN codes:
- 8004897996493
- Catalogue:
- Workshop equipment (p. 328)
- To be found in category:
- Workshop equipmentBodyworkPlasma cuttingSUPERIOR PLASMA 70 plasma cutting system
Inverter system for compressed air plasma cutting with contact ignition of the pilot arc. For fast, distortion-free cutting, lattice cutting and gouging of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc. Can be connected to automatic cutting machines
Properties:
• Easy to transport
• High cutting current stability
• Easy-to-read digital control panel with easy adjustment
• Remote control
• Protection functions: thermostat, overvoltage, undervoltage, overload, short circuit at the torch, phase failure.
Complete with torch.
Mains voltage 230/400V
Protection class IP 23
Compressed air 4-5 bar
Max. power consumption 5.5/8.5 kW
Max. cutting thickness 30 mm
Air consumption 200 l/min.
Control range 20-50/20-70 A
Power factor: 0.9
Mains frequency: 50/60 Hz
Max. current: 50 A - 35% / 70 - 30%
Max. open-circuit voltage: 310/325 V
Max. power consumption 16/13 A
Including TOLEDO 300 earth clamp
Properties:
• Easy to transport
• High cutting current stability
• Easy-to-read digital control panel with easy adjustment
• Remote control
• Protection functions: thermostat, overvoltage, undervoltage, overload, short circuit at the torch, phase failure.
Complete with torch.
Mains voltage 230/400V
Protection class IP 23
Compressed air 4-5 bar
Max. power consumption 5.5/8.5 kW
Max. cutting thickness 30 mm
Air consumption 200 l/min.
Control range 20-50/20-70 A
Power factor: 0.9
Mains frequency: 50/60 Hz
Max. current: 50 A - 35% / 70 - 30%
Max. open-circuit voltage: 310/325 V
Max. power consumption 16/13 A
Including TOLEDO 300 earth clamp